Cabinet Lock
Cabinets Lock
Cabinet Drawer Lock
Step 1. The Combi-Cam replaces a standard keyed 3/4 diameter cylinder. For new applications, drill a 3/4" hole. Insert the cylinder body through the front. Note: Be sure the set pin hole is at the bottom (red arrow) .
Mailbox Lock
Back View of installation and cylinder.
Mailbox Locks
Step 2. Place the pronged washer for wood applications. Tighten the 3/4" cylinder nut securely. The pronged washer will grip the wood. In addition, you have the option of installing small screws in the holes provided in the pronged washer.
Mail Box Locks
Step 3. Insert dial face module through the front of the cylinder. NOTE: Make sure the black rubber ring goes around the shaft as is inserted through the hole.
Mail Box Lock
Step 4. The Combi-Cam replaces a standard keyed 3/4 diameter cylinder. For new applications, drill a 3/4" hole. Insert the cylinder body through the front. Note: Be sure the set pin hole is at the bottom (red arrow)
NOTE: Also make sure the reset button on the dial face is at the bottom (red arrow).
Step 5. Stop-Cam Placement
Position 1. For the cam to rotate to the right as you face the front of the lock. Position 2. For the cam to rotate to the left as you face the front of the lock. 1. 2.
Step 6. Scramble the dials to lock the Combi-Cam.
Step 1. Installation will either be replacing or the metal will be punched. Please note the punch template to the left (comes with product instructions).
Step 2. Wood Prong Washer not required.
Step 1. Set the combination to the number that opens the cabinet locks. Factory default is 0-0-0.
Step 2. Push the change button in (located on bottom of the cabinets locks) with a paperclip while setting a new combination.
