The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use
in gate operator applications. An 11-inch wire whip antenna is included
for local reception. The whip antenna connects to the receiver’s Type-F
antenna connector. Also included is 3-feet of coax cable and a bulkhead
connector for remotely mounting the whip antenna in installations where
the receiver is mounted inside a shielded metal enclosure, such as a
gate operator housing. An external Model 106603 Remote Whip Antenna can
also be used with this receiver.
The Model 109950 is a dual frequency receiver. An internal jumper
selects either 300 MHz or 310 MHz operating frequency. The 300 MHz
frequency is compatible with standard Multi-Code transmitters, the 310
MHz frequency is compatible with the Stanley version Multi-Code
The operator supplies 12-24 volt power to the receiver, or the
receiver can be powered by a separate AC power transformer or DC power
supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A
3-foot, 2-conductor wire lead with spade lugs is provided for
attachment to the gate operator’s radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a
transmitter set to the same code is activated, the receiver’s output
will activate, triggering the gate operator.