Two-channel digital receiver with two isolated relay outputs designed for use with Linear’s DX Format transmitters. This receiver can be used in a variety of remote control applications. When the receiver detects a signal from a transmitter programmed into its memory, the appropriate relay output activates. The relays have four optional output configurations. When the relays are set to latch, the receiver outputs will follow the open/close door status sent from DXT-31 door/window transmitters. In a typical installation, the receiver is connected to an alarm control panel, door strike, camera, high current relay or some other devices. Transmitters are used to activate or control the devices.
32 transmitter capacity
RF activity indicator
Quick-learn programming
Operates on 11-17 VDC or 12-16 VAC power
Two channels
Low transmitter battery reporting
DX format
Two form relay outputs
One Amp contact rating @ 24 Volts AC/DC
Selectable relay activation time
Current consumption: 25 mA standby, 90 mA operating @ 12 VDC