Linear MultiCode MCS109920 300MHz 10 Dip Switch 110V Gate Door Opener Receiver
- 115 Vac transformer input (included)
The
Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate
operator applications. An 11-inch wire whip antenna is included for
local reception. The whip antenna connects to the receiver’s Type-F
antenna connector. If the receiver is mounted inside a shielded metal
enclosure, such as a gate operator housing, an external Model 106603
Remote Whip Antenna should be used.
The receiver includes a
24-volt AC power transformer that plugs directly into a 115 VAC power
outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A
3-foot, 2-conductor wire lead with spade lugs is provided for
attachment to the gate operator’s radio activation terminals.
The
receiver is programmed with a 10-position coding switch. When a
Multi-Code transmitter set to the same code is activated, the receiver’s
output will activate, triggering the gate operator.
The
Multi-Code 109920 by Linear Corporation MCS109920 radio receiver is
directly compatible with the following model remotes to control one
device:
- Multi-Code: 3089, 4120, 4140.
Not all compatible models may be listed
Features:
- Activates one gate or garage door opener
- Ideal for use on gate openers
- Antenna with 3 ft. coaxial cable and bulkhead connector are included
- Optional remote antenna mounting kit for maximum range sold separately One-Year manufactures warranty
Specifications:
- Operates on 115 VAC power
- Codes: 1,024 (set by dip switches)
- Dimensions: 3.625" W x 5.25" H x 1.5" D